TPS54318RTETTIStep-Down Regulator 2.95V to 6V Input, 3A, 2MHz Synchronous Step Down SWIFT DC-DC Converter Conv DC-DC 2.95V to 6V Step Down Single-Out 0.8V to 4.5V 3A 16Pin WQFN EP T/R
¥
71.38
显示的图像仅供参考,应从产品数据表中获得准确的规格。
TPS54318RTETTI
制造商:
TI
制造商型号#:
TPS54318RTET
百芯编号#:
CM6035190
价格(CNY):
¥
71.38
百芯库存:
350
个
库存地点:
可供应量:
234
个在库
此为供应商库存,需要与销售确认
产品类别:
DCDC,转换器,DC-DC
产品描述:
Step-Down Regulator 2.95V to 6V Input, 3A, 2MHz Synchronous Step Down SWIFT DC-DC Converter Conv DC-DC 2.95V to 6V Step Down Single-Out 0.8V to 4.5V 3A 16Pin WQFN EP T/R
TheTPS54318 device is a full featured 6-V, 3-A, synchronous, step-down, current mode converter with two integrated MOSFETs.
The TPS54318 device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm x 3 mm, thermally enhanced, QFN package.
The TPS54318 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.
Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-μA typical supply current. Using the enable pin, shutdown supply current is reduced to 2 μA by entering a shutdown mode.
Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency fold back and thermal shutdown protects the device during an overcurrent condition.
Use SwitcherPro power supply design software to create, manage and share custom power supply designs for the TPS54318 by clicking here.
For more SWIFT documentation, see the TI website at www.ti.com/swift.