The TLK2501IRCP is a Multi-gigabit Transceiver used in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2501 supports an effective serial interface speed of 1.5 to 2.5Gbps, providing up to 2Gbps of data bandwidth. The TLK2501 is pin-for-pin compatible with the TLK2500. The TLK2501 is both pin-for-pin compatible with and functionally identical to the TLK1501, a 0.6 to 1.5Gbps transceiver providing a wide range of performance solutions with no required board layout changes. The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50R. The transmission media can be printed-circuit board, copper cables or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
Programmable voltage output swing on serial output
Rated for industrial temperature range
On-chip PLL provides clock synthesis from low-speed reference
Loss of signal (LOS) detection
Ideal for high-speed backplane interconnect and point-to-point data link
2.5V Power supply for low power operation
On-chip 8/10-bit encoding/decoding, comma alignment and link synchronization