The MMA8653FCR1 is an intelligent, low-power, three-axis, capacitive Micromachined Accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable options, configurable to two interrupt pins. Embedded interrupt functions enable overall power savings, by relieving the host processor from continuously polling data. There is access to either low-pass or high-pass filtered data, which minimizes the data analysis required for jolt detection and faster transitions. The device can be configured to generate inertial wake-up interrupt signals from any combination of the configurable embedded functions, enabling the accelerometer to monitor inertial events while remaining in a low-power mode during periods of inactivity.
1mg per LSB High Sensitivity
Low Noise - 150 Micro g per Root Hertz (Independent of Resolution)
7 Micro Amps Low-power Mode
1.62 to 3.6V Interrupt and IIC Interface Supply
1.5 to 800Hz Output Data Rate
ESD sensitive device, take proper precaution while handling the device, device is sensitive to mechanical shock, improper handling can cause permanent damage of part or cause part to otherwise fail.