The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used, a +5 V, -5.2 V (or -4.5 V) and ground are required. The small outline 8-lead package and the single gate of the ELT25 makes it ideal for those applications where space, performance and low power are at a premium. pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VThe 100 Series contains temperature compensation.
Features
---
|
2.6ns Typical Propagation Delay
100 MHz FMAX CLK
24 mA TTL Outputs
Flow Through Pinouts
ESD Protection: >1 KV HBM, > 400 V MM
Operating Range: VCC= 4.5 V to 5.5 V with GND= 0 V; VEE= -4.2 V to -5.7 V with GND= 0 V
Internal Input Pulldown Resistors
Q Output will default HIGH with inputs open or < 1.3 V
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
