The ADXL213EB is a simple breakout board that allows quick evaluation of the performance of the ADXL213 dual axis ±1.2g accelerometer. The ADXL213 is a 2 axis, low noise, temperature stable accelerometer with PWM output. The user needs to add only three additional through hole passive components, depending on the bandwidth required in the application. The ADXL213EB has a 5pin 0.1 inch spaced header for access to all power and signal lines that the user can attach to a prototyping board (breadboard) or wire using a standard plug. Two holes are provided for mechanical attachment of the ADXL213EB to the application.
Easy connectivity and do not support stand alone functionality
Dual axis accelerometer on a single IC chip
1mg resolution at 60Hz
Low power of 700µA at VS = 5V (typical)
High zero g bias stability
High sensitivity accuracy
Pulse width modulated digital outputs
X and Y axes aligned to within 0.1° (typical)
BW adjustment with a single capacitor
Qualified for automotive applications
ESD sensitive device, take proper precaution while handling the device.
ADXL213EB is not reverse polarity protected. Reversing the +V supply and ground pins causes damage to the ADXL213.