下载
© Semiconductor Components Industries, LLC, 2012
April, 2012 − Rev. 12
1 Publication Order Number:
CAT5411/D
CAT5411
Dual Digitally Program-
mable Potentiometers (DPP)
with 64 Taps and SPI
Interface
Description
The CAT5411 is two Digitally Programmable Potentiometers
(DPPs) integrated with control logic and 16 bytes of NVRAM
memory. Each DPP consists of a series of 63 resistive elements
connected between two externally accessible end points. The tap
points between each resistive element are connected to the wiper
outputs with CMOS switches. A separate 6−bit control register (WCR)
independently controls the wiper tap switches for each DPP.
Associated with each wiper control register are four 6−bit non−volatile
memory data registers (DR) used for storing up to four wiper settings.
Writing to the wiper control register or any of the non−volatile data
registers is via a SPI serial bus. On power−up, the contents of the first
data register (DR0) for each of the two potentiometers is automatically
loaded into its respective wiper control register.
The CAT5411 can be used as a potentiometer or as a two terminal,
variable resistor. It is intended for circuit level or system level
adjustments in a wide variety of applications.
Features
• Two Linear−taper Digitally Programmable Potentiometers
• 64 Resistor Taps per Potentiometer
• End to End Resistance 2.5 kW, 10 kW, 50 kW or 100 kW
• Potentiometer Control and Memory Access via SPI Interface:
Mode (0, 0) and (1, 1)
• Low Wiper Resistance, Typically 80 W
• Nonvolatile Memory Storage for up to Four Wiper Settings for Each
Potentiometer
• Automatic Recall of Saved Wiper Settings at Power Up
• 2.5 to 6.0 Volt Operation
• Standby Current less than 1 mA
• 24−lead SOIC and 24−lead TSSOP
• Industrial Temperature Ranges
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
TSSOP−24
Y SUFFIX
CASE 948AR
PIN CONNECTIONS
SOIC−24 (W)
(Top View)
NC
V
CC
R
L0
R
H0
1
R
W0
CS
NC
NC
NC
A
0
SOIC−24
W SUFFIX
CASE 751BK
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
ORDERING INFORMATION
SO
HOLD
SCK
NC
NC
WP
SI
A
1
R
L1
R
H1
CAT5411
NC
NC
R
W1
GND
TSSOP−24 (Y)
(Top View)
CAT5411
WP
CS
R
W0
R
H0
R
L0
V
CC
NC
NC
NC
NC
A
0
SO
SI
A
1
R
L1
R
H1
R
W1
GND
NC
NC
NC
NC
SCK
HOLD
1
页面指南
