下载
© Semiconductor Components Industries, LLC, 2013
March, 2013 − Rev. 0
1 Publication Order Number:
EVBUM2178/D
NCN5150NGEVB
NCN5150 Evaluation Board
User's Manual
Introduction
The NCN5150SOICGEVB and NCN5150QFNGEVB
evaluation boards demonstrate the NCN5150 M-BUS
transceiver in SOIC and QFN package respectively. These
evaluation boards include all external components needed
for operating NCN5150 and demonstrate the small PCB
surface area such an implementation requires.
Overview
The NCN5150 is a single-chip integrated slave
transceiver for use in two-wire Meter Bus (M-BUS) slave
devices and repeaters. The transceiver provides all of the
functions needed to satisfy the European Standards EN
13757−2 and EN 1434−3 describing the physical layer
requirements for M-BUS. It includes a programmable
power level of up to 2 (SOIC version) or 6 (NQFP version)
unit loads, which are available for use in external circuits
through a 3.3 V LDO regulator. The NCN5150 can provide
communication up to the maximum M-BUS
communication speed of 38,400 baud (half-duplex).
Applications
Multi-energy Utility Meters
• Water
• Gas
• Electricity
• Heating Systems
Features
• Single-chip MBUS Transceiver
• UART Communication Speeds Up to 38,400 baud
• Integrated 3.3 V VDD LDO Regulator with Extended
Peak Current
• Capability of 15 mA
• Supports Powering Slave Device from the Bus or from
External Power Supply
• Adjustable I/O Levels
• Adjustable Constant Current Sink up to 2 or 6 Unit
Loads Depending on the Package
• Low Bus Voltage Operation
• Extended Current Budget for External Circuits:
minimum 0.8 mA
• Polarity Independent
• Power-Fail Function
• Fast Startup − No External Transistor Required on STC
Pin
• Industrial Ambient Temperature Range of −40°C to
+85°C
• Available in:
♦ 16-pin SOIC (Pin-to-Pin Compatible with
TSS721A)
♦ 20-pin QFN
• These are Pb-free Devices
Figure 1. The NCN5150NGEVB Evaluation Boards
http://onsemi.com
EVAL BOARD USER’S MANUAL
