下载
9570J–AT42–05/2013
Features
Sensor Keys:
Up to 11 QTouch
®
channels
Data Acquisition:
Measurement of keys triggered either by a signal applied to the SYNC pin or
at regular intervals timed by the AT42QT1110 internal clock
Keys measured sequentially for better performance, or in parallel groups for
faster operation
Raw data for key touches can be read as a report over the SPI interface
Discrete Outputs:
Configurable “Detect” outputs indicating individual key touch (7-key mode)
Device Setup:
Device configuration can be stored in EEPROM
Technology:
Patented spread-spectrum charge-transfer (direct mode)
Key Outline Sizes:
6 mm × 6 mm or larger (panel thickness dependent); widely different sizes and
shapes possible, including solid or ring shapes
Key Spacings:
7 mm center-to-center or more (panel thickness dependent)
Layers Required:
One
Electrode Materials:
Etched copper, silver, carbon, Indium Tin Oxide (ITO)
Electrode Substrates:
PCB, FPCB, plastic films, glass
Panel Materials:
Plastic, glass, composites, painted surfaces (low particle density metallic
paints possible)
Panel Thickness:
Up to 10 mm glass, 5 mm plastic (electrode size dependent)
Key Sensitivity:
Individually settable via simple commands over serial interface
Adjacent Key Suppression
®
(AKS
®
)
Patented AKS technology to enable accurate key detection
Interface:
Full-duplex SPI slave mode (1.5 MHz), CHANGE pin, discrete detection
outputs
Atmel AT42QT1110-MZ
AT42QT1110-AZ
11-key QTouch
®
Touch Sensor IC
DATASHEET
